銅陵b2級橡塑保溫管 吸引降噪橡塑海綿管價格實惠 現貨充足

橡塑保溫材料與其他保溫材料的泡孔結構比：

Rubber and plastic heat preservation material and other insulation foam pore structure than:

1、玻璃纖維：開孔結構水汽滲透率*（濕阻因子為3-5），導致隨使用時間延長導熱系數升高，使保溫效果大大降低。

1, glass fibre: open pore structure high water vapor permeability (wet resistance factor for 3 to 5), result in higher with the extension of use time coefficient of thermal conductivity, the heat preservation effect is reduced greatly.

2、發泡聚乙烯：連孔結構，添加阻燃劑后有較高的水汽滲透率（濕阻因子為1000），其材質硬而發脆，易破損，壽命短。

2, foaming polyethylene: even the pore structure, adding flame retardant has a high water vapor permeability (wet resistance factor of 1000), the material of hard and brittle, easy damage, short service life.

3、橡塑保溫材料：閉孔結構有極小的水汽滲透率（濕阻因子為10000以上）能長期保持較低的導熱系數。

3, rubber and plastic heat preservation material: obturator structure with minimal water vapor permeability (wet resistance factor of 10000 or above) to maintain low coefficient of thermal conductivity for a long time.

采暖、空調管道保溫材料性能比較表

Heating, air conditioning pipe heat preservation material performance comparison table

材料名稱 密度 導熱系數 溫度 經濟指標

The name of the material Density coefficient of thermal conductivity temperature indicators

水泥珍珠巖管 250-400 0.058-0.087 <600 不適用

Cement perlite tube 250-400-0.058-0.087 < 600 shall not apply

巖棉保溫管 100-200 0.082-0.058 -268-350 綜合成本高

Rock wool insulating tubes, 100-200-0.082-0.058-268-350 comprehensive cost is high

硅酸鋁纖維管 300-380 0.047-0.058 ≤1000 價格較高

Aluminum silicate fiber, 300-380-0.047-0.058 or less 1000 price is higher

聚苯乙烯塑料管20-50 0.031-0.047 -80-70 價格適中

Polystyrene plastic pipe 20 to 50 moderate price 0.031-0.047-80-80

聚氨酯預制保溫管 30-42 0.023 50-160 成本高

Prefabricated polyurethane insulation pipe 30-50-160 0.023 42 cost is high

橡塑絕熱保溫管 50-60 0.032 -50-110 價格相對低廉

Rubber insulation pipe 50 to 60 0.032-50-110 price is relatively cheap

水泥珍珠巖，巖棉，聚苯乙烯塑料

Cement perlite, rock wool, polystyrene plastics

銅陵b2級橡塑保溫管 吸引降噪橡塑海綿管價格實惠 現貨充足

橡塑保溫管生產廠家在產品的運輸過程中總會遇到這樣那樣的問題，那能否對這些問題進行正確的分析，并提出解決方案就顯得尤為重要了。下面小編就來給您科普一下。

Rubber insulation pipe manufacturers in the process of the transportation of products will always meet this or that kind of problem, is that the correct analysis of these problems, and puts forward solution is particularly important. Below small make up just to give you the popular science.

    橡塑保溫管能夠減少取暖能源消耗，是新一代的節能保溫材料。上世紀70年代，不少國家已經開始重視建筑節能，橡塑保溫管開始走向市場，有效的減少了取暖保溫消耗的能源。

Rubber insulation pipe can reduce heating energy consumption, is the new generation of energy-saving insulation materials. In the 1970 s, many countries have begun to attach importance to building energy efficiency, rubber insulation pipe began to market, reduce the heating heat consumption of energy.

塑套鋼保溫管是由高密度聚乙烯外套管、聚氨酯泡沫保溫層及其內工作鋼管緊密結合而成的起凝膠絕熱氈加聚氨酯高壓發泡復合方案。說道這里，zui關鍵的就是直埋管的防腐措施，長期埋在地下，必須要經受的住大自然的腐蝕，高壓聚乙烯塑料保護層是該管道維持正常運轉的根本所在。直埋保溫管道能在0.6-1.2米凍土層內直埋熱損失比普通的管道可降低40%以上，工作使用壽命比其他絕熱防腐材料提高3-5倍以上，壽命可以達到30-50年。直埋保溫管道自三十年代聚氨酯合成材料誕生以來，一直作為一種優良的絕熱保溫材料而得到迅速發展，起使用范圍也就越來越廣泛，更由于其施工簡單、節能防腐*，占據著各行各業。直埋保溫管適合輸送在-50℃—600℃范圍內的各種介質，直埋保溫管用于液體、氣體及其他介質的輸送，在石油、化工、航天、軍事、集中供熱熱、中央空調、市政等等管道的絕熱保溫工程。 

Plastic set of steel casing outside insulation pipe is made of high density polyethylene, polyurethane foam insulation layer and its internal work steel pipe tightly combined with thermal insulation blanket of the gel and high-pressure polyurethane foam composite scheme. Said here, the key is buried pipe anticorrosion measures, buried in the ground for a long time, must undergo the living nature of corrosion, high pressure polyethylene plastic covering layer is to maintain the normal operation of the pipeline. Directly buried insulating pipe can be directly buried within 0.6-1.2 meters permafrost thermal loss than ordinary pipe can reduce more than 40%, the service life of the work three to five times higher than that of other anti-corrosion insulation materials, can reach 30 to 50 years of life. Polyurethane directly buried insulating pipe from the 30 s synthetic materials since birth, has been as a kind of excellent heat insulation material and got rapid development, the use scope is also more and more widely, more because of its simple construction, energy-saving anti-corrosion effect is remarkable, occupying all walks of life. Suitable for conveying directly buried insulating pipe are in - 50 ℃, 600 ℃ within the scope of all kinds of medium, directly buried insulating pipe used for conveying liquid, gas and other medium, in petroleum, chemical, aerospace, military, central heating heat, central air conditioning heat insulation engineering, municipal, etc of the pipe.